DZL series Biomass Chain Grate Boiler

DZL series Biomass Chain Grate Boiler

Rated Capacity: 1~10 t/h
Rated Pressure:0.4~2.5 Mpa
Fuel: Biomass fuel (biomass pellet, wood chips, bamboo chips, straw, rice hull, peanut shell, bagasse, mustard stalk, cotton stalk, cotton seeds, coconut shell, corncob, waste cloth, etc.)
Applic

Get Price
Send Email


Introduction


Zhongding DZL series biomass boiler is single drum vertical chain grate steam boiler with three-pass water and fire tube, the fuel is biomass pellet. Water cooled tubes are arranged at the both sides, the front and back walls. The front wall water cooled tubes form the front arch. The drum is cross connect with the right and left anti-coking header by water cooled tubes, thus forming the lower arch and the upper two convection cooled flue. Single-return threaded pipe is arranged in drum, cast iron economizer is arranged in the tail of the boiler. Biomass pellet fuel from bucket fell onto the grate, and enter into the furnace for combustion, flue gas enter into the tail of boiler through the upper of back arch (first return), next, enter into the front of the boiler through convection flue (second return), and then enter into the back smoke chamber through the threaded pipe bank (third return), finally enter into the economizer and dust remover, and discharged into the atmosphere by induced draft fan through chimney. Based on the boiler design, it is better to use the biomass fuel with less biomass particles, the size with less than 3mm should not exceed 30%, the largest particles should not exceed 30mm.

APPLICATION

 
 

FEATURES


PARAMETER


Model Rated steam
capacity (t/h)
Rated pressure
(MPa)
Effective area
of grate (㎡)
Thermal efficiency
(%)
Fuel
consumption (kg/h)
DZL1-0.7/1.0/1.25-T 1 0.7/1.0/1.25 2.22 82 ~200
DZL2-0.7/1.0/1.25-T 2 0.7/1.0/1.25 4.1 82 ~400
DZL4-1.25/1.6-T 4 1.25/1.6 5.85 82 ~800
DZL6-1.25/1.6-T 6 1.25/1.6 7.95 82 ~1200
DZL8-1.25/1.6-T 8 1.25/1.6 9.75 82 ~1600
DZL10-1.25/1.6-T 10 1.25/1.6 10.77 82 ~2010
Note: Parameters is for reference only, if any change should follow actual drawings