The correct operation method of the biomass dishwashing stove:


1. Turn on the water source switch and check whether the water discharge pipe and filter in the machine are installed properly. Open the machine door.


2. Turn off the machine's power switch, the machine is powered on, and the power indicator light is on.


3. Press the indicating water addition switch on the controller, the temperature indicator will light up, and the machine will start to enter water.


4. The machine automatically enters the heating state after the water has entered.


5. When the water temperature reaches the set temperature, the machine will automatically stop heating.


6. After configuring the soap dispenser, the detergent and quick-drying agent required for the dishwasher will be automatically injected into the dishwasher according to the adjusted dosage.


7. Operators must not put their hands in the water tank. Put the cup and glassware into the container, insert the dish obliquely into the place where the dish container is placed, the dish is facing upwards, and the silverware and coffee are inserted downward.